$1,029.00
All prices include 10% GST.
Select item

Technical details

Bar length30-35 cm
Bar length12-14 in
Power1.7 kW
Power consumption2100 W
Rated voltage36 V

Features

The pictures shown are sample photos. The actual appearance of the equipment features and their specific attachment to the product may differ from the pictorial representations, but will have the same functionality.

FOR EASY CLEANING. When cleaning your battery power tool, you can simply remove the battery slot in just a few simple steps.
REMOVABLE BATTERY SLOT
QUICK AND EASY TO USE. Thanks to the bayonet closure, you can open and close the tool-free fuel cap in just a few simple steps.
TOOL-FREE FUEL CAP FOR OIL TANKS
FOR EFFECTIVE PROTECTION OF POWER ELECTRONICS AND ENGINE PARTS. The non-woven air filter filters sawdust, fine dust and dirt from the cooling air flow. This keeps the heat sinks of the power electronics and the engine parts clean in the long term. The removed non-woven air filter can be easily and effectively cleaned with STIHL Varioclean and then reused. Cleaning should be carried out regularly – monthly in the event of heavy use.
NON-WOVEN AIR FILTER
EFFECTIVE PERFORMANCE MONITORING. The derating function offers you two advantages in your work: first, this function protects your chainsaw against possible overheating by reducing the current. Additionally, it notifies you by means of a reduction in power if you only have very little battery power remaining. In both cases, the function allows you to finish cuts that have already started without the engine switching off.
PERFORMANCE ELECTRONICS WITH DERATING FUNCTION
IMPORTANT STATUS INFORMATION AT A GLANCE. The large LED display provides feedback on the status of important chainsaw components.
OPERATION AND NOTIFICATION COCKPIT
FOR SIMPLE AND SECURE RE-TENSIONING. Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.
SIDE-MOUNTED CHAIN TENSIONING
PROTECTION AGAINST LOSS The nuts are attached to the sprocket cover in a captive manner. This makes it impossible for the nuts to fall off and get lost when the cover is removed.
CAPTIVE NUTS
FOR CONTROL AND MONITORING OF THE OIL SUPPLY. The LED display on the oil sensor informs you about the delivery of chain lubricant. If the LED is red, there is not enough chain oil reaching the chain. When the oil supply is sufficient, the LED is off.
OIL SENSOR

Service & tips